Kenmore 721.33189 Manual Del Propietário página 19

WARNING
Electric Shock or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in
electric shock or personal injury
from cleaner suddenly starting.
Disconnect the power cord from the electrical
outlet.
To access the light bulb, firstlower handle to
lay vacuum body flatand remove the screws
which secure the light cover to the vacuum.
Remove the cover.
Remove the light bulb by pushing the bulb in
while turning counterclockwise to release from
the slot. Pull the light bulb straight out.
To release
Bulb
Socket
Bull
CAUTION
Do not use a bulb rated over 130 V
AC-25W. During extended use, heat
from the bulb could overheat
surrounding plastic parts.
To
To replace the light bulb, carefully insert and
turn clockwise to fit securely into slot.
NOTE: Use Sears Bulb.
Position the light cover back on the vacuum.
Replace the light cover screws.
O oO CAUTION
t plug in or turn on until
etely reassembled.
-19-