Kenmore 721.33189 Manual Del Propietário página 7

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Bare floor setting: Pushthe carpet/barefloor
selector all the way back and down toward the
bottom of the floornozzle unhl it locks into
place.
In thts postt_onthe agttator does not revolve.
This setting should be used for cleaning
hardwood and hie floors and when any
attachments (tools) are used.
Carpet setting: SItde the selectorall the way
forward and up to the carpetposttton.
In this position the agitator will turn. When
carpets are being cleaned the selector should
be in this position.
NOTE: For longer belt hfe, turn vacuum off
before moving selector. Fanlureto do so can
damage or break the belt
Carpet/Bare
Floor Selector
To Bare
> To Carpet
Floor Pos_hon
Position
To select a pile height setting:
When it is necessary to raiseand lower the
nozzle for vanouscarpetpileheights,first turn
off your cleaner. Then ttltthe vacuumcleaner
back unttlthe frontwheels are slightly off the
floor and slidethe heightadjustmentknob to
the desiredsetting.
Recommended pile height settings:
High:Shagcarpet, l ongpile,plush, s catterrugs
Med: Medium to long pile
Low:Short to medium pile
Ex Low: Very low pile
WARNING
Personal Injury Hazard!
DO NOT place hands or feet
underneath the unit when changing
from the bare floor to the carpet pile
height setting. The agitator revolves
rapidly when the vacuum is turned on
and is in the carpet setting.
-7-

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

721.33289

Tabla de contenido