Hedge Trimmer - Garland HTN 70 D Instrucciones De Manejo

Hedge Trimmer

Technical data
Model
Operating Voltage
Nominal Frequency
Nominal Consumption
Cutting movements
Blade length
Cutting thickness
Weight (without fl ex)
Noise Pressure Level according to EN 60745-2-15 dB (A)
Vibration according to EN 60745-2-15
Class of protection: II / DIN EN 50144/VDE 0740
Interference suppressed in accordance with EN 55014, EN 61000-3-2:95, EN 61000-3-3:95 .
We reserve the right to make changes to the technical specifi cations.
The devices are manufactured in accordance with the provisions of DIN-EN 50144-1and DIN-EN 50144-2-15 and fully
comply with the provisions of the German Equipment and Product Safety Act.
General safety instructions
Information on noise emission in accordance with
"Machine Noise Information Ordinance 3. GPSGV
and Machinery Directives: the noise pressure level
at the place of work can exceed 85 dB(A). In such
cases the operator will require noise protection (e.g.
wearing of ear protectors).
Attention: Noise protection ! Please observe the
local regulations when operating your device.
General safety instruction
Usage of hedge trimmer always involves a risk
of accidents, therefore please observe the relevant
accident prevention instructions.
The machine has been constructed according to the
latest technology and in accordance with the recog-
nised technical safety regulations.
use of the machine can involve risks to the user
or third persons, and can cause damage to the
machine or other objects.
Attention: Using electric power tools, you must
observe following fundamental safety instructions
to protect yourself against electric shock, against
danger of injuries and danger of fi re. Read all these
instructions before using the hedge trimmer and
observe them. Keep these safety instructions at a
safe place.
Use the machine in a safety conscious manner
for suitable applications in a technically perfect
condition only and with due regard to the operating
instructions! Immediately rectify or have rectifi ed
any faults which could adversely affect safety!
V~
Hz
W
min
-1
cm
mm
kg
m/s
2
This machine may cause serious injuries. Please
read the instruction manual carefully as to the
correct handling, the preparations, the maintenance
and the proper use of the hedgetrimmer. Familiarize
your-self with the machine before the fi rst use and
also have yourself introduced to practical use of the
machine.
Application
The machine is only intended for trimming hedges.
Use for any other purpose constitutes inappropriate
use. The manufacturer / supplier is not liable for any
injury and/or damage arising from
use. This risk is the sole responsibility of the
user.Appropriate use of the machine also includes
adherence to the operating instructions and
Nevertheless,
compliance with the servicing and maintenance
instructions.
Always keep the instruction manual close at hand
during operation!
Safety instruction
1. Keep your working area tidy. Disorder at your
2. Please consider environmental infl uences. Do
GB-1
HTN 70 D
230
50
650
3000
70
24
3,7
83
< 2,5
working area may lead to accidents.
not expose power
use power tools in wet or moist surroundings.
Ensure that there is good lighting. Do not use
power tools near infl ammable fl uids or gases.
ENGLISH
inappropriate
tools to rain. Do not