STEP-BY-STEP INSTRUCTIONS
Blue Activation Indicator
Electrically Heated Plugger
6.4
STERILISATION, DESINFECTION & MAINTENANCE
Control Console - Clean the exterior of the console by wiping with a
soft cloth moistened with mild non-chlorinated detergent or disinfecting
solution. Do not use disinfecting solutions which contain phenol,
anticorrosive or very acidic or very alkaline solutions.
Caution
DO NOT SUBMERGE the device in any fluid.
Note
When wiping down the hand piece cable, gently wipe from the middle
of the cable out to the hand piece and console. Avoid gripping the cable
tightly.
Hand pieces - Clean the exterior of the hand piece with a soft cloth
moistened with mild non-chlorinated detergent or disinfecting solution. Do
not use disinfecting solutions which contain phenol, anticorrosive, very
acidic or very alkaline solutions.
Caution
DO NOT SUBMERGE the hand pieces in any fluid or spray any fluid
directly onto the hand pieces.
18/40
Activation Cuff
Fig. 6 - Pack hand piece components
BENCALDDFUWEB / Rev.04 / 02-2019 (Old ZF 1902103.EN)