Uline H-1394 Manual Del Usuario página 3

Uline will replace, free of charge, parts that are
damaged during the course of normal operation due to
material or workmanship defects.
This warranty extends for a period of two years on all
mechanical components and one year on all electrical
components (measured from the date you took
possession of your conveyor).
OPERATING ISSUE
Conveyor does not open or roll smoothly.
Product stops on conveyor or does not
flow smoothly.
PACKAGE STOP KIT
The Package Stop is a unique design that stops cartons
at the end of the conveyor and folds down easily when
not in use. (See Figure 2)
Package Stop Bar
Shoulder Bolt
Figure 2
PAGE 3 OF 21
WARRANTY
For specific warranty information or assistance, please contact
ULINE at 1-800-295-5510.
TROUBLESHOOTING
POSSIBLE CAUSE
Casters are locked or clogged with debris.
Bolts and nuts have been over tightened.
Conveyor has suffered physical damage.
Leg elevations are out of height
adjustment.
Skate wheels are jammed.
Conveyor has suffered physical damage.
PRODUCT OPTIONS
Operating Instructions
To operate the Package Stop, simply pull upward on
the Package Stop Bar until it clears the Shoulder Bolt
located on each side of the conveyor. Then rotate the
Package Stop downward until it is parallel to the legs
of the conveyor. To engage the Package Stop simply
rotate the Package Stop Bar upward and lock over the
Shoulder Bolt on each side of the conveyor. Be sure
that the Package Stop is secured to prevent damage to
product being conveyed.
DESCRIPTION
Kit, 18" Package Stop
Kit, 24" Package Stop
Kit, 30" Package Stop
NOTE: This warranty does not cover damage
due to accident, misuse, abuse and
negligence. This warranty does not cover
damage due to improper operation or
maintenance, connection to improper voltage
supply, or attempted repair/modification by
anyone other than authorized service personnel.
RECOMMENDATIONS
Check casters and unlock or clear as
necessary.
Check bolt tension.
Check unit and replace damaged parts.
Readjust legs. (See Page 2, Step 6.)
Check and clear debris as necessary.
Check unit and replace damaged parts.
ULINE PART NO.
--------------
--------------
--------------
MFG. PART NO.
06360-18
06360-24
06360-30
0521 IH-1394