Filter Removal - Suntec Wellness KLIMATRONIC Dry Fix 1000 Manual De Instruccion

FILTER REMOVAL

•The filter can be removed from its slot by gripping the filter handle and sliding it out from the back of the appliance.
• Every 2 weeks, remove the filter and clean it with warm water, below 40° C. Allow it to dry naturally and then replace.
Fig 03
MAINTENANCE INSTRUCTION
1. The unit is not allowed to be located on the floor of soft and uneven surface when the unit is in operation to avoid
occurrence of vibration and noise.
2. Never insert any slim rod and hard object into the unit body to avoid occurrence of hazard or unit failure.
3. During power off or when not in use for a long time, please pull out the power cord from the outlet.
4. For a better dehumidifying effect, the areas in front and rear of the unit should be clear and free from obstacles, which will
block the air flow for the unit.
5. Clean the filtering net once every two weeks (never use alcohol, gasoline, on or hot water with a temperature of 40° C.
SPECIFICATIONS
MODEL
SPECIFICATION
POWER SUPPLY
POWER INPUT
RUNNING CURRENT
NET WEIGHT
MOISTURE REMOVAL
liter/day 30 R H 80%
℃ ）
CABINETDIMEMSION
TEMP. RAHGE FOR USE
WATER TANK CAPACITY
EC-Declaration of Conformity
The unit complies with the essential health and safety requirements of the European Union. The EC declaration of conformity is
the basis for the CE marking of this unit.
With the publication of this manual, all previous are not valid. SUNTEC, SUNTEC Wellness, KLIAMTRONIC and the Sun logo
are registered trademarks. © 2013/01 SUNTEC WELLNESS GMBH
Dry Fix 1000 Dry Fix 1200
230V~50Hz
250W 260W
1.2A 1.2A
11,1 Kg 11,2 Kg
10 liter/day 12 liter/day
(W)365x(D)220 x(H)490
Dry Fix 1600 Dry Fix 2000
410W
2.0A
13,3 Kg 13,7 Kg
16 liter/day 20 liter/day
5° C~32° C
2.3L
480W
2.5A