Rain Bird TBOS-BT Instalación página 12

Ocultar thumbs Ver también para TBOS-BT:
Tabla de contenido

Publicidad

ENGLISH
A. SPECIFICATIONS
• Programmable with a smartphone or
tablet through Rain Bird Apps
• Communication with the Rain Bird App
with Bluetooth 4.0 technology.
• Operates with the RAIN BIRD TBOS
latching solenoid.
• 3 independent programs (А, В, C) with up
to 8 start times per day and per program.
Stations can be assigned to several
programs with different watering run time.
• Watering time from 1 minute to 12 hours
per station.
• Watering
cycle:
(7 days), even, odd, odd-31 (no watering on
31), cyclical.
• Manual watering capabilities.
• Program level and global Monthly
Seasonal Adjust (0 to 300%).
• Rain Delay (1 to 14 days).
• Watering programs backup.
• Station names capabilities.
• Master Valve connection (not available on
1-station module).
• Sensor connection (Rain sensor or Flow
sensor).
• Option: Radio connection with addition of
a TBOS-ll Radio Adaptor.
• Operating temperature range: 14°F to
149°F.
• Operating pressure: up to 10 Bars.
B. 9V BATTERY INSTALLATION
(not included)
See diagram 1.1
• Powered by a new 9V alkaline battery
type 6AM6 (international standard) or 6LR61
'(European standard)
• Low battery icon displays on the Rain Bird
App.
customized
cycle
C. SOLENOID INSTALLATION
See diagrams 1.3
Mounting the solenoid on the valve: remove
the existing solenoid on the valve and
replace it with the latching solenoid. Gently
screw it hand-tight.
1. Connect the latching solenoid to the
control module. Use the Rain Bird wire
connectors supplied with the module.
Important: the wire run between the control
module and the solenoid must not exceed 10
m using 0.75 mm
wire.
2
Check the system by using the manual start
function. If the system does not turn on,
screw the solenoid a little tighter to the valve.
D. MAINTENANCE
• Replace the 9V battery (alkaline: type
6LR61 or equivalent) once a year.
• If you connect a transmitter to the control
module in infrared mode, make sure that the
optical connector is clean when the
connection is made. Use water to clean it if
needed.
FCC STATEMENT
Caution: the user that changes or
modifications not expressly approved by the
party responsible for compliance could void
the user's authority to operate the
equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class В
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction, may cause harmful interference
to radio communications. However, there is

Publicidad

Tabla de contenido
loading

Tabla de contenido