Circuit Diagram; Recycling The Washer; Service + Support - sunjoe SPX3001 Manual Del Operador

Fig. 20
Pre-filter
Fig. 21
Inlet filter
2. Clean the nozzle with the needle clean out tool provided
(Fig. 22). Remove the spray wand from the gun; remove
any dirt from the nozzle hole and rinse.
Fig. 22
3. Remove additional debris by back flushing water through
the nozzle and spray wand. To do this, place the end of
your garden hose (with water running) to the tip of the
nozzle, pushing water and debris out of the back opening
of the nozzle and spray wand.
!
Needle clean out tool

Circuit Diagram

A circuit diagram for the pressure washer is provided below for
your reference (Fig. 23).
Fig. 23
Micro-switch
Motor
Capacitor
Disposal

Recycling the washer

• Do not dispose of electrical appliances as unsorted
municipal waste. Use separate collection facilities.
• Contact your local government agency for information
regarding the collection systems available.
• If electrical appliances are disposed of in landfills
or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your
health and well-being.
• When replacing old appliances with new ones, the retailer
is legally obligated to take back your old appliance for
disposal at least free of charge.

Service + Support

If your Sun Joe SPX3001 electric pressure washer requires
®
service or maintenance, please call the Snow Joe
Sun Joe customer service center at 1-866-SNOWJOE
®
(1-866-766-9563).
Model + Serial Numbers
When contacting the company, reordering parts, or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
Record the following numbers from the housing or handle of your
new product:
Model #:
S P X 3 0 0 1
Serial #:
13
Power cord
On/off switch
+
®