Care And Cleaning - Juiceman The Big Apple Manual Del Usuario

• All pits and large seeds should be removed from fruits, including:
o Apricots
o Cherries
o Nectarines
o Mangos
o Peaches
o Plums
o Melons
• Remove and discard outer leaves of non-organic produce. Peel away any wax
coatings.
• Trim any bruised or discolored sections of fruits and vegetables.
• The design of the feed chute accommodates larger produce. It will easily
accommodate most whole fruits and vegetables, such as, apples, beets,
carrots and celery. If necessary, cut into large pieces before inserting into feed
chute.
• Be sure all parts of the juice extractor are clean and dry. See the CARE AND
CLEANING instructions section of the manual on page 11.
USING YOUR JUICE EXTRACTOR
1. Assemble the fruits and /or vegetables to be used on the counter or in a bowl
next to the extractor.
2. Place the juice pitcher under the spout and be sure the pulp container is in
place.
Note: When using the appliance, do not allow the pulp container to overfill. This
may cause the appliance to stall.
3. Plug appliance into standard electrical outlet.
4. Turn the power to LOW (1) and allow it to run 10 seconds before placing any
food into the feed chute.
5. Select the LOW (1) for soft to medium textured fruits and vegetables; use HIGH
(2) for hard foods, such as, carrots, beets and broccoli.
6. Insert the fruits and/or vegetables into the feed chute and use the food pusher
as a guide to gently direct the produce. To get the most juice from the fruits
and vegetables, do not rush the food through the appliance.
Note: Do not allow food to extend above the max fill line on the feed chute.
Important: Never place fingers or hands into the feed chute.
7. The juice extractor will automatically separate the juice and pulp.
Note: Both the juice pitcher and pulp container can be emptied at any time.
Simply turn the speed control to OFF (0). Be sure to replace both containers
before resuming juicing.
8. When juicing is complete, turn the speed control to OFF (0) and wait for the
motor to come to a complete stop. Allow all remaining juice to drip into juice
pitcher before removing it.
9. Unplug appliance and follow directions under DISSASEMBLING YOUR JUICE
EXTRACTOR.
0
JUICE EXTRACTOR TIPS
• Do not put food into the extractor before turning the appliance on.
• Let the appliance run for at least 10 seconds before placing any food into the
feed chute.
• Do not let the juice or pulp container overfill while using the machine. Turn the
appliance off, wait for the motor to stop running and any juice to stop flowing.
Empty the juice and/or pulp container. Be sure they are properly replaced
before resuming operation of the extractor.
• Do not process bananas, avocados or coconut. They have no juice and will clog
the appliance.
• Be sure to remove all pits and large seeds from fruits.
• For maximum nutritional benefits, drink your processed juice right away.
FOR OPTIMUM JUICING
• Avoid excessive buildup of pulp on the underside of the cover.
• Remove rind of melons; because they are so thick, they water down drinks.
• Refrigerate washed ripe fruits and vegetables until ready to use.
USES FOR THE PULP
The pulp from the fruits and vegetables is high in nutritional value. Use it to add
fiber and flavor to muffins and quick breads. Use it to thicken soups, casseroles
and sauces. Use fruit pulp to add nutrition and flavor to desserts, such as,
puddings and cakes. Be sure to use it the same day you extract the juice.
Pulp is also food for your garden. You can use it as compost.

Care and Cleaning

This product contains no user serviceable parts. Refer service to qualified service
personnel.
Important: Always unplug your juice extractor from the outlet before cleaning.
CLEANING
1. Disassemble the appliance following the instructions for disassembly.
Tip: Pulp from pulp container can be used in many different ways: making
breads, muffins, cakes, soup stocks, compressed facial packs and garden
compost material. See USES FOR THE PULP.
2. Using a sponge or damp cloth, clean the base, feet and underside of the
appliance. If necessary, you may use a damp toothbrush or cloth to clean juice
from the inside the motor shaft (on top of motor base).
Important: Do not immerse the base in water or spray with water. Clean only by
wiping with a damp sponge, cloth or paper towel.
3. All parts – except the base – are dishwasher-safe (top-rack only) or you may
wash in warm, soapy water, using any mild liquid dishwashing detergent. Do
not use any products containing ammonia or scouring powders, as these can
dull, scratch or mar the surface. Use the cleaning brush provided to remove
pulp left on any of the removable parts. Do not use metal brushes or pads.