Bose SoundLink Mini Bluetooth speaker II Guia Del Usuario página 3

Bose Corporation hereby declares that this product is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive
requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance
The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/
EC, is in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by
Regulation (EU) No. 801/2013.
Required Power State Information
Power consumption in specified power mode, at
230V/50Hz input
Time after which equipment is automatically
switched into mode
Power consumption in networked standby if all wired
network ports are connected and all wireless network
ports are activated, at 230V/50Hz input
Network port deactivation/activation procedures.
Deactivating all networks will enable standby mode.
For Europe:
Frequency band of operation 2400 to 2483.5 MHz:
• Bluetooth: Maximum transmit power less than 20 dBm EIRP.
• Bluetooth: Low Energy: Maximum power spectral density less than 10 dBm/MHz EIRP.
This symbol means the product must not be discarded as household waste, and should be delivered to an
appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources,
human health and the environment. For more information on disposal and recycling of this product, contact
your local municipality, disposal service, or the shop where you bought this product.
Please dispose of used batteries properly, following local regulations. Do not incinerate.
Removal of the rechargeable lithium-ion battery in this product should be conducted only by a qualified
professional. Please contact your local Bose retailer or see products.bose.com/static/compliance/index.html for
further information.
Important Safety Instructions
Standby
≤ 0.5 W
≤ 30 minutes
N/A
Bluetooth: Deactivate by clearing the pairing list by pressing and
holding the Bluetooth button for 10 seconds. Activate by pairing with a
Bluetooth source.
Power Modes
Networked Standby
Bluetooth® ≤ 2.0 W
≤ 5 minutes
≤ 2.0 W
English - 3