Shimano UM-5XZ0A-006 Manual De Instrucciones página 6

UM-1NJ0A-004
Front Chainwheel /
Bottom Bracket
IMPORTANT NOTICE
• Contact the place of purchase or a distributor for information on
installation, adjustment, and replacement of the products which are
not found in the user's manual. A dealer's manual for professional
and experienced bicycle mechanics is available on our website (https://
si.shimano.com).
For safety, be sure to read this "user's manual"
thoroughly before use, follow it for correct use,
and store it so that it can be referenced at any time.
The following instructions must be observed at all times in order to
prevent personal injury and physical damage to equipment and
surroundings. The instructions are classified according to the degree of
danger or damage which may occur if the product is used incorrectly.
DANGER
WARNING
CAUTION
Important Safety Information
WARNING
• Do not disassemble or modify the product. This may cause the product
to not operate correctly, and you may suddenly fall and be seriously
injured.
• Check that there are no cracks in the crank arms before riding the
bicycle. If there are any cracks, the crank arm may break and you may
fall off the bicycle.
• Be careful not to let the hemming of your clothes get caught in the
chain while riding. Otherwise, you may fall off the bicycle.
CAUTION
• Be careful not to touch the teeth of chainrings. There is a danger of
injury.
Notice
• Use a neutral detergent to clean the crank arm and the bottom
bracket. Using alkaline or acidic detergents may cause discoloration.
• If pedaling performance does not feel normal, perform an inspection
again.
• Do not wash the bottom bracket with high-pressure washer.
• The gears should be periodically washed with a neutral detergent. In
addition, cleaning the chain with neutral detergent and lubricating it
can be an effective way of extending the life of the gears and the
chain.
• The cuffs of your clothing may get dirty from the chain while riding.
• Products are not guaranteed against natural wear and deterioration
from normal use and aging.
User's manual
Failure to follow the instructions will result
in death or serious injury.
Failure to follow the instructions could
result in death or serious injury.
Failure to follow the instructions could
cause personal injury or physical damage
to equipment and surroundings.
• For maximum performance we highly recommend SHIMANO
lubricants and maintenance products.
Regular Inspections Before Riding the Bicycle
Before riding the bicycle, check the following items. If any problems are
found, consult your place of purchase or a distributor.
• Are there any cracks in the crank arms?
• Is the pedaling performance smooth?
• Does the drive train perform gear shifting smoothly?
• Is there looseness in the component parts?
• Are the components securely installed to the frame/handlebar?
• Do any abnormal noises occur while riding?
Names of parts
„ Unit bearing types
Crank
Fastening sections
„ Non-unit bearing types
Crank
Bearing section
(bottom bracket)
Fastening section
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Please note: specifications are subject to change for improvement without notice. (English)
© Apr. 2020 by SHIMANO INC. ITP
Chainrings
Bearing section
(bottom bracket)
Crank
Chainrings
Fastening
section
Crank
Fastening section