Reliable The IronMaven J420 Manual De Instrucciones página 8

HOW TO USE YOUR IRONING SYSTEM
3. Connect the electrical cord to the main power outlet.
4. Turn on the boiler to the 2nd position so that both the boiler and the iron
are on. The green light on the boiler and the iron ready light on the iron will
turn on.
on the iron (without placing the iron on good fabric) in order to eliminate
any possible residue that may have been built up by treatments during the
production process.
builds up enough pressure. The orange control light (4) will light up when you
are ready to start.
8. If the iron has not been used recently, there may be condensation in the
steam hose. Simply press the iron steam button (C) for a few seconds to
flush any condensation (water) out of the steam hose.
and off. This is normal because it indicates that steam is being generated
in the boiler.
If it is for an extended period of time (months) then it is best to flush out the
remaining water. To do so, follow the water removal instructions as outlined
in the maintenance of the boiler section.
THIS MODEL IS PROVIDED WITH THE FOLLOWING FEATURES
Red control light
Continuous steam button
this procedure.
06