Troubleshooting - Reliable The IronMaven J420 Manual De Instrucciones

TROUBLESHOOTING

disassemble or attempt to repair the unit on your own. Return the unit to Reliable
Corporation (see warranty) for examination, repair or replacement.
PROBLEM
No steam is released
through the steam iron.
The iron soleplate
remains cold.
from the soleplate.
out of iron.
the plastic.
09
POSSIBLE CAUSES
turned on.
4. Generator is not fully
heated.
2. Temperature is set at
minimum.
ture is too low to iron with
steam.
2. The steam generator is not
fully heated yet.
2. Not using the right type of
water for your boiler.
rest at high temperature.
REMEDY
switch on.
2. Put required amount of
3 Plug unit into outlet.
4. Wait for light (4) to turn on.
2. Turn the temperature dial to
the appropriate setting.
-
between 2 and 3 dots.
2. Wait for the (4) light to
come on.
erator as per the enclosed
instructions.
tilled water after you have
powder provided).
unattended.
-
-