Fagor 8H-290AB Manual De Instrucciones página 48

OPERATION
When an oven function is active.
• You can change the oven function us-
ing the function selector knob. Note:
the previously set temperature will not
be changed To adjust the temperature,
touch and hold
temperature using the +/– knob. Touch
to confirm or wait a few seconds for the
adjusted temperature to be automatically
confirmed.
• Turn the function selector knob to the "0"
to turn off the appliance.
• To adjust the temperature, touch and
hold and then adjust the temperature
using the +/– knob. Touch to confirm or
wait a few seconds for the adjusted tem-
perature to be automatically confirmed.
• You can activate the child lock
• You can activate the OpenUp! function.
(opens the door automatically)
• You can use timed operation, and de-
layed timed operation.
Child Lock
To activate the child lock touch and hold
for 3 seconds and the
shown on the display. If you try to use any
function when child lock is active,
be shown on the display and you will hear a
beep. To deactivate the child lock touch and
hold for 3 seconds and the
will be off.
Kitchen Timer
Touch and hold the
and will be shown on the display and
will flash. Now you can:
• Set the kitchen timer by turning the
+/– knob (clockwise), then touch
confirm.
• Adjust the kitchen timer setting as need
48
and then adjust the
symbol will be
will
symbol
sensor in any mode
to
using the +/– knob (in either direction).
Touch to confirm the adjusted setting.
• To turn the kitchen timer use the +/– knob
to dial the value down to
to confirm.
The Kitchen Timer operates independently of
any active oven functions. When the set time
has elapsed, you will hear beeping. Touch any
sensor to mute the beeping. You can set a
maximum of 99 minutes.
Preview and modify settings during oven
operation
Touch once to check the temperature inside
the oven cavity. Touch
set temperature. Touch again to displaying
the current time.
To adjust the set temperature, touch and
hold and the currently set temperature will
be displayed. Use the +/– knob to adjust
it as needed. Touch
temperature. The new temperature is not set
until confirmed.
Use the function selector knob to change
the function at any time. When you confirm
the new function, the temperature will be
displayed (currently set temperature, not
the default temperature for a given oven
function). To adjust temperature, touch and
hold and set a new temperature using the
+/– knob. Touch to confirm and the appli-
ance will operate with the new settings.
End oven function
Set the function selector knob to "0" to end
any function. By default the oven functions
operate indefinitely, but you can set the oven
to turn off using timed operation function of
delayed timed operation function. The only
. Touch
again to check the
to confirm the new