RE-ASSEMBLING: HCM-750 Series
STEP 1
Insert pump outlet
into hose opening and
gently press into place
until water pump outlet
will not sit any further
inside water tube.
STEP 5
Re-insert the water fill
baffle into the water
reservoir of the main
housing by lining up
with the guides and
gently pushing down
to insert.
END-OF-SEASON CARE AND STORAGE
Follow the CLEANING instructions when the humidifier will not be used for at least one week or more, or
at the end of the season.
NOTE: Discard old filters and start with new filters next season.
Dry the humidifier completely before storing.
DO NOT store with water inside the main housing water reservoir or water tube.
Pack unit in original carton and store in a cool, dry location.
8
STEP 2
Insert water pump/hose
assembly into slot
in main housing.
Note: The pump will
only fit one way.
STEP 6
Place filter tray onto
main housing. Then
replace the filters back
onto the filter tray.
STEP 3
Affix water hose to
main housing by gently
inserting water hose
onto the water outlet.
STEP 7
Replace the top grille and
protective clear cover.
STEP 4
Line up the fill funnel
with the slots behind
the water window.
Gently insert into place.