Accessories And Spare Parts; Technical Data - Hilti DD 200 / DD-HD 30 Manual De Usuario

Symbol Status
Shows red
Flashes red
LED on the left shows yellow
LEDs in the middle show green
LED on the right shows red
LED on the right flashes red
3.7

Accessories and spare parts

Spare parts
Item number
51279
2006843
2104230
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables.
4

Technical data

4.1 Product properties DD 200
For rated voltage, rated current, frequency and/or input power, refer to the country-specific type
identification plate.
34 English
Designation
Hose connector
Carbon brushes 220-240 V
Carbon brushes 100-127 V
Meaning
• The diamond core drilling machine is
in working order. The carbon brush
wear limit has almost been reached.
The indicator helps ensure that the
carbon brushes are replaced in good
time. After the lamp lights up for the
first time, the machine may continue
to be used for several hours before
the automatic cut-out is activated.
• The diamond core drilling machine is
in working order. The carbon brushes
have been changed and must be run
in by letting the machine run under no
load for at least one minute without
interruption, in order to achieve the
optimum service life.
• The diamond core drilling machine
is no longer in working order. The
carbon brushes are worn. The carbon
brushes must be replaced.
• The diamond core drilling machine is
no longer in working order. Damage
to the diamond core drilling machine.
Overheating. See "Troubleshooting".
Contact pressure is too low.
The contact pressure is at the optimum
level.
Contact pressure is too high.
Contact pressure is too high. The rated
current limit has been exceeded.
2274306
*2274306*