Kohler K-110 Guia De Instalacion página 14

Bonnet
Stem
Extension
Stem
Screw
11. Six Prong Handle Installation
NOTICE: Risk of product damage. Do not overtighten.
Overtightening will damage the handle.
Verify that the valves are in the closed position.
Insert the stem screw into the stem extension and tighten with a
screwdriver.
Loosen the setscrew.
Position the handle on the stem extension.
Verify that the handle label is in an even horizontal position. If
needed, remove the handle and adjust its position on the splines
of the stem extension until horizontal. For fine adjustment, pull
out the stem extension until it disengages from the valve, rotate,
and return it to its original position. Do not pull the stem
extension completely out.
Tighten the setscrew.
Repeat for the other handle.
1008209-2-H
Setscrew
Handle
Hot Cold
Open
Shown In Closed Position
14
Open
Kohler Co.