Kohler K-110 Guia De Instalacion página 6

Plug Button
O-Ring
Washer
Flanged Union
Nut
3. Freestanding and Deck-Mount Faucet Installation
Carefully slip the O-ring into the groove in the plug button.
Press the plug button into the hole in the back of the cradle.
Apply thread sealant to the threads of the plated supply pipes.
Slide a nut onto one of the plated supply pipes. Be careful to
avoid scratching the plated finish.
Thread the flanged union onto the supply pipe. Verify that the
flanged union is level.
Set the washer on top of the flanged union.
Repeat for the other supply pipe.
Set the spout assembly on both washers.
Thread the nuts up onto the spout assembly to secure it to the
supply tubes.
1008209-2-H
Cradle
Spout
Assembly
Plated Supply Pipe
6 Kohler Co.