Vehicle Coverage - Launch Creader V+ Manual De Usuario

LAUNCH
Creader V+ English User's Manual
Figure 3-4
Use the [ ] / [ ] key to select the desired one and press [ ] to save your
change.

3.6 Vehicle Coverage

The Creader V+ is specially designed to work with all OBD II compliant
vehicles, including Controller Area Network (CAN). It is required by EPA that
all 1996 and newer vehicles (cars and light trucks) sold in the United States
must be OBD II compliant and this includes all American, Asian and European
vehicles.
A small number of 1994 and 1995 model year gasoline vehicles are OBD II
compliant. To verify if a 1994 or 1995 vehicle is OBD II compliant, check the
Vehicle Emissions Control Information (VECI) Label, which is located under
the hood or by the radiator of most vehicles. If the vehicle is OBD II compliant,
the label will designate "OBD II Certified". Additionally, Government regulations
mandate that all OBD II compliant vehicles must have a "common" 16-pin
Data Link Connector (DLC).
For the vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link
Connector) under the dash and the Vehicle Emission Control Information
Label must state that the vehicle is OBD II compliant.
10