jbc CT-SA Manual Del Usuario página 3

Features
Residue Tray
Protective Screen
Operation
The CT-SA Solder Pot Cartridge Stand holds the handle T245 or T470 with the Solder Pot
Cartridge to avoid it tipping over accidentally. Find the cartridges availables in www.jbctools.com
As a safety precaution, before placing the handle, make sure the station is off and the tin is cold.
1. Unlock the screw and open the holder.
Quick release screw
hole for screwing onto
the bench
2. Place the handle with the cartridge. Be
careful to position it correctly.
3. Once in place, lock the screw and connect
the handle to the stand or the converter
(Ref. CHB-A).
- Do not melt "Cored Flux solder".
- Recommended temperatures for fine
wires (up to AWG 24 aprox) and lead
free solder is 300ºC. For thicker wires,
increase the temperature as necessary,
but always the minimum possible.
w w w.jbctools.com
hole for screwing
onto the bench
3 3 3