Chopin Aqua-TR Modo De Empleo página 80

GB
80
Aqua-TR
■ Utilization
Note: Parameter settings menus can be accessed from the
computer only when the link between computer and Aqua-
TR is established.
❏ By mean of the RS 232 cable supplied, connect the Aqua-TR to
the computer serial port (COM 1 or COM 2).
❏ Connect the Aqua-TR supply, then run the "Aqua-TR Pro user"
software on the computer.
❏ The linking computer - Aqua-TR is automatic.
If necessary select menu "Com." and configure the port No (COM1
or COM2) which the Aqua-TR is connected to.
❏ If necessary the connection can be forced from the window
hereunder.
Some information relating to the software is also displayed.
User's manual
07/2015