Publicidad
Enlaces rápidos
*P516-861*
P516-861
LT Dummy function
Tools
included
not included
Z\,"
(3 mm)
1
Prepare the door.
1a
Mark the door with a vertical line at desired
backset.
1b
Mark the door for two screws as shown.
1c
Drill pilot holes for two screws.
a
b
2
Install spindle and mounting plate.
3
Install rose.
4
Install lever.
4a
Place the lever over the rose and spindle.
4b
By hand only, thread the lever bushing on the
mounting plate.
c
LT-Series
b
a
4c
Tighten the lever bushing using the spanner
wrench.
c
Double dummy application
For double dummy application, install the second lever with
the mounting plate rotated 90 degrees as shown
Drill pilot holes for
two screws.
Mounting plate rotated
90° from first lever.
Customer Service
1-877-671-7011
www.allegion.com/us
Installation Instructions
Publicidad
Manuales relacionados para Schlage LT Serie
Resumen de contenidos para Schlage LT Serie
- Página 1 *P516-861* LT-Series P516-861 LT Dummy function Installation Instructions Tighten the lever bushing using the spanner Install spindle and mounting plate. wrench. Tools included not included Z\,” Install rose. (3 mm) Double dummy application For double dummy application, install the second lever with the mounting plate rotated 90 degrees as shown Prepare the door.
- Página 2 LT-Series LT Dummy Instrucciones de instalación LT Faux Boutons Notice d’installation Instale el husillo y la chapa de montaje Ajuste el casquillo de la manija con una llave. Installez l’axe de la poignée et la plaque de Serrez la bague du levier à l’aide de la clé à montage.