Solo 452 Manual Original. Manual Del Usario página 17

- ENGLISH -
Instruction manual
Original instructions
Caution! Prior to operating the unit, please
read the owner's manual carefully, and most
importantly, observe all safety rules.
Observe the maintenance guidelines closely to
ensure the long service life of your equipment.
Your dealer will be glad to assist you with any
questions.
Information about material ingredients
(VO (EC) No.1907/2006 „REACh")
can be found on our homepage under:
https://de.solo.global/de/content/12-service
Exhaust emission level
The CO2 value determined in the EU type-approval
process can be found on our homepage under:
https://de.solo.global/de/content/12-services
Packaging and disposal
Please keep the original packaging in order to
protect the equipment against transport damage in
case you ever need to ship it or transport it.
The original packaging and the leaf blower (at the
end of its service life) must be properly disposed of
according to the local environmental regulations.
For USA only:
Emissions Control Warranty Statement
The Environmental Protection Agency and Solo are
pleased to explain the emission control system on
your small non-road power equipment engine. In the
US new small non- road engines must be designed,
built, and equipped to meet the Environmental
Protection Agency's standards. Solo must warrant
the emission control system on your small non- road
engine for the period of time listed below provided
there has been no abuse, neglect, or improper
maintenance of your small non-road engine.
Your emission control system includes parts such as
the carburetor, the ignition system, and the exhaust
system.
Where a warrantable condition exists, Solo will repair
your small non-road power equipment engine at no
cost to you including diagnosis, parts, and labor.
Manufacturer's Warranty Coverage
Solo's small non-road power equipment engines are
warranted for a period of two years. If any emission
control related part on your engine is defective, the
part will be repaired or replaced by Solo.
Contact Information for Authorized Service Center
Locations, Replacement Parts,
Warranty and Technical Information
Warranty repairs must be completed by a SOLO
Authorized Service Center.
SOLO USA, Inc.
5100 Chestnut Avenue
Newport News, VA 23605
1-800-765-6462
techserv@solousa.com
Motorized mistblower
1. Symbols
The following symbols are used in this manual and
on the product:
Thoroughly read these operating
instructions before undertaking any
maintenance, installation and cleaning
steps
Always handle this power tool with
particular care
Wear the prescribed protective clothing.
Wear ear defenders before starting the
engine
Wear face protection
(e.g., safety goggles).
Wear protective gloves when handling and
working with the equipment
A breathing mask should be worn when
using poisonous chemicals
Petrol is highly flammable
Keep open flames away from the power
tool and the fuel can.
Never smoke near the power tool or where
the equipment is refuelled!
No-one else may remain in the vicinity of
the motor appliance whilst it is operating.
Switch off engine
choke open
Choke partially open
Warm-up
choke closed
In the best interest of continued technological
progress we reserve the right to change the design
and configuration of any product without prior
notice.
For that reason, no claims can be accepted with
reference to text and illustrations in this manual
National requirements
The pressure sprayer may be subject to national
requirements for regular inspection by designated
bodies, as provided for in Directive 2009/128/EC
1 Directive 2009/128/EC of the European Parliament
and of the Council of 21 October 2009 establishing a
framework for Community action to achieve the
sustainable use of pesticides
452
1 .
ENGLISH 1