Yamato HCM 650 Manual Del Usuario página 21

12.Maintenance:For your safety, service and maintenance should be
performed regularly by a qualified technician.
13.Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. Do not modify this tool, and do
not use this tool for a purpose for which it was not intended.
14.WARNING!The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that may occur. The
operator must understand that common sense and caution are factors, which
cannot be built into this product, but must be supplied by the operator.
Specific Product Warning and Precautions
1. Maintain a safe working environment. Keep the work area well it. Make
sure there is adequate surrounding workspace. Always keep the work area
free of obstructions, grease, oil, trash, and other debris. Do not use the
Cement Mixer in areas near flammable chemicals, dusts, and vapors.
2.
Always place the Cement Mixer on a solid, flat, level, surface that is
capable of supporting the weight of the Mixer and its load.
3.
Keep a safe clearance around the Cement Mixer. Keep all
people(except the operator) a minimum of six feet from the Mixer during
operation.
4.
Keep all guards in place and in proper working condition.
5.
Remove adjusting tools, shovels, hand trowels, etc. Make sure all
adjusting tools, shovels, hand trowels, and other tools and equipment are
removed from the Cement Mixer prior to turning it on.
6.
Never stick your hands and/or tools into the Drum Assembly while the
Cement Mixer is in operation.
7.
Do not overload the Cement Mixer. An overload may damage the
equipment.
8.
Do not move the Cement Mixer during operation. The Mixer could tip
over or the Engine could be damaged.
9.
Use eye and hand protection. Wear ANSI approved safety impact eye