Yamato HCM 650 Manual Del Usuario página 25

Bracket (70)
3. With assistance, set the Lower Drum (22) with attached Arm (31) and
Support Bracket Seats (19) into Stand assembly and align the bolt holes;
Fasten together using Bolts M8x60 (64), Flat Washers (3), and Nuts M8 (6).
Tighten with wrench until secure. Figure 3
Support Bracket Seats(19)
Bolts(64)
Flat Washers(5)
Nuts(8)
Bolts (4),
Flat Washers (3),
Nuts (6)
Wheel
Bolts (5)
Flat Washers (3),
Nuts(6)
Stand (66)
Leg (1)
Lower Drum(22)
Arm(31)