Yamato HCM 650 Manual Del Usuario página 28

M8x20 (21), Spring Washers (15) and Flat Washers (16);
Use Bolts M8x25 (14), Spring Washers (15) and Flat Washers (16) to
attach the Motor assembly to
secure. Figure 8
Bolt(21)
Spring washers(15)
Flat washers(16)
Stand(66)
9. Position each Mixer Blade (27) inside the assembly Drum with the pointed
end facing downward. The shape bend in the Blades should point in the
direction of the Drum rotation;
Fasten tops of Mixer Blades (27) to Upper Drum (25) using Bolts M8x20
(21), Flat washers (3) and Nuts M8 (20);
Fasten pointed ends of Mixer Blade to Lower Drum (22) using Bolts M8x20
(21), Flat washers (3) and Nuts M8 (20). Figure 9
Mixer Blade(27)
the Stand (66). Tighten connections until
Bolt(14)
Spring washers(15)
Flat washers(16)
Bolts(21)
Flat Washers(3)
Nuts(20)