MAHLE VCT Manual De Usuario página 12

22
VCT Ozone Generator
Use and maintenance manual
n Using the smartphone/tablet camera, scan
the QRcode that's on the equipment's name-
plate (see red frame in the picture below)
Type the MAC address that's on the same
n
nameplate.
Fig. 6 Position of device QRcode
Once the equipment has been paired with smart-
phone/tablet, select:
Test mode
n
+ Vehicle
+ Bus
+ Room
n Chosen program (P1, P2 or P3)
Fig. 7 Test selection page
Once you have selected the program, press the
START icon for at least 2 seconds to start the
program.
Once the program has started, you can monitor
its progress from the following page and wait for
its completion.
The RED color of the vehicle/room/bus icon in-
dicates that the ozone level is high/dangerous.
At any time, you can stop the program by press-
ing the STOP button and wait for the App to con-
firm completion and for the ozone level to be be-
low the safety threshold, identified by the black
colour of the vehicle/room/bus icon.
Fig. 8 Test monitoring page
Access to the
following submenus:
+ Home
+
Company Data
+ Device info
+ Test mode
+ Archive
Home - Main menu
Company Data menu
(entry of company
data)
Device Info menu
(reading of device
data)
Test Mode menu
(Vechile - Bus - Room)
Archive menu
Menu for selection of
following functions:
+ QRcode scan
+ Firmware update
+ Close app
23
QRcode icon
The equipment is not
paired via bluetooth
®
with the App
The equipment is
paired via bluetooth
®
with the App
Vehicle test mode.
When the icon color
is red, it means the
ozone level is high/
dangerous.
Bus test mode.
When the icon color
is red, it means the
ozone level is high/
dangerous.
Room test mode.
When the icon color
is red, it means the
ozone level is high/
dangerous.
Icon to send reports
by mail at the end of
the test