Technical Features - MAHLE VCT Manual De Usuario

24
VCT Ozone Generator
Use and maintenance manual

6. Technical features

Technical features
Interface Control panel
Automatic functions
Performances Ozone production
Dimensions WxDxH
Loadless weight
Power supply Voltage
(standard)
Power
Power supply Voltage
(optional)
Frequency
Power
Environmental Operating temperature
conditions
Humidity
Ambient pressure
O3 sensor Category: consumable
Other features International Protection Degree
1 Button
4 LEDs
1. Program P1
2. Program P2
3. Program P3
5.000 mg/h
360x205x255 mm
3.8 kg
12 VDC
80 W
110-230 VAC
50-60 Hz
80 W
5-50°C
10-80% R.H. (non-condensing)
75 kPa up to 106 kPa
1,000 hours / 12 months
IP20
7. Use
7.1
Preliminary checks before
use
The equipment is not intended to be used in
n In ATEX classified area (potential explosive
atmospheres).
Check that nobody is inside the vehicle/
room.
Make sure inside the vehicle/room there
aren't products as:
Flammable or dangerous substances
n
Food and drinks
n
Medicines.
n
7.2
Equipment positioning
The equipment has to be positioned on a level
surface to ensure the correct operation.
25
Vehicle positioning
The vehicle has to be located outdoors or
n
in ventilated workshops.
Equipment positioning (use inside vehicle)
n Inside the vehicle, preferably on the front
seat, with ozone output pointing at the
center of the vehicle.
In case of large volume vehicles, on one
n
of the central row seats with ozone output
pointing at the centre of the vehicle.
Equipment positioning (use inside rooms)
In the middle of the room, in an elevated
n
position.