Product Features; Functional Description; Intended Use - Bosch PSB Serie Manual Original

OBJ_BUCH-530-001.book Page 16 Wednesday, October 10, 2007 10:49 AM
16 | English
Hold the power tool only by the insulated
gripping surfaces when performing an oper-
ation where the cutting tool may contact hid-
den wiring or its own cord. Contact with a
"live" wire will also make exposed metal parts
of the power tool "live" and shock the opera-
tor.
When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the machine has come to a
complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and pull
the mains plug when the cable is damaged
while working. Damaged cables increase the
risk of an electric shock.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.

Intended Use

The machine is intended for impact drilling in
brick, concrete and stone as well as for drilling in
wood, metal and plastic. Machines with electron-
ic control and right/left rotation are also suitable
for screwdriving and thread-cutting.
1 609 929 N03 | (10.10.07)

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Keyless chuck*
2 "Drilling/Impact Drilling" selector switch
3 Handwheel "PowerControl"(PSB 1000 RPE)
4 "Drilling/screwdriving" selector switch
5 Lock-on button for On/Off switch
6 On/Off switch
7 Rotational direction switch
8 Button for depth stop adjustment
9 Wing bolt for adjustment of auxiliary handle
10 Auxiliary handle*
11 Depth stop*
12 Chuck key*
13 Key type drill chuck*
14 Allen Key**
15 Thumbwheel for speed preselection
(PSB 700 RE/PSB 700 RES)
*The accessories illustrated or described are not in-
cluded as standard delivery.
**Commercially available (not included in the delivery
scope)
Bosch Power Tools