General; Description; Specifications - Promax MZ-805 Manual De Instrucciones

MZ-805 L/C/R meter

1 GENERAL

1.1 Description

The MZ-805 Precision Bridge provides a fast, convenient and accurate
means of measuring the inductance, capacitance, resistance, D and Q of
components with a basic accuracy of 0.1%. The major and minor parameters of
the component are displayed simultaneously.
The microprocessor controlled unit provides fully automatic mode and
range selection for a wide range of components. Control is by front panel
keyboard or by RS232 link to a PC which can be used to set up all
measurement functions.
The MZ-805 can be programmed to sort a range of components into bins
according to value. Multiple bins can be set to sort different tolerances of the
same value or different values.
Up to nine measurement set-ups can be stored in the instrument in non-
volatile memory and called up for re-use with a few keystrokes.
Connections to the components are made via the built in four—terminal
test fixture or plug—in the optional external adapters for axial components, for
SMD or directly connecting to an automatic classifier system. All them providing
true contact resistance free measurements for low impedance components.
The capacitance (up to 100pf) introduced by an external test fixture can
be cancelled out permitting high impedance measurements to be made with
confidence.

1.2 Specifications

Specifications apply for 18 ° C − 28 ° C ambient after 30 minute warm-up.
August 2002
L/C/R METER
MZ-805
Page 1