Wall Plate
Setscrew
8. Install the Soap Basket
Partially thread two setscrews into each post.
Align the soap basket over the wall plates.
Tighten the setscrews. Do not overtighten.
9. Install the Glass Shelf
Partially thread a setscrew into each post.
Place the posts over the wall plates.
Slide the glass shelf into the slots on the posts.
Verify the glass shelf is horizontally center with the posts. The
distance from the edge of the glass shelf to the center of the
nearest post should be equal at each end.
Secure the glass shelf to the posts with the nylon screw. Do not
overtighten.
Tighten the setscrews on the posts. Do not overtighten.
1008432-2-A
Wall Plate
Basket
Nylon Screw
Bracket
8
Setscrew
Glass Shelf
Kallista