Uline H-951 Manual Del Usuario página 6

INSTALLING LEG KIT WITHOUT FORKLIFT CONTINUED
9. Remove leg set and included hardware from box.
(See Figure 18)
Figure 18
10. Place leg on top of pallet. Make sure the leg panel
faces outward and along the width of tunnel.
(See Figure 19)
Figure 19
11. Secure leg to tunnel with six bolts, six washers and six
lock washers. Use three on each corner.
(See Figure 20)
PAGE 6 OF 21
12. Repeat steps 10 and 11 with the other leg.
13. With two people, lift shrink tunnel upright.
14. Finished unit with legs. (See Figure 21)
Figure 21
Figure 20
0421 IH-951