Ingecon Sun Ems Board Energy Manager; Description; Local Communication; Remote Communication - Ingeteam INGECON SUN EMS Manual De Configuración

Ingeteam

3 INGECON SUN EMS Board energy manager

3.1 Description

The INGECON SUN EMS Board energy manager consists of a card that is installed inside the
main inverter in the installation.
A. Wi-Fi antenna
B. RS-485
C. External Wi-Fi button
The Wi-Fi button is not necessary for FW version AAX1055_P and newer, cause
the Access Point functionality is always accesible.
The main features of the INGECON SUN EMS Board are summarized below.

Local communication

Local communication with the INGECON SUN EMS Board can be established via Wi-Fi or
Ethernet.

Remote communication

Remote communication with the INGECON SUN EMS Board is established using the Device ID
and Password provided with the board.
Communication with the devices
The connection between the INGECON SUN EMS Board and the devices in the installation is
established via Ethernet, Wi-Fi and/or RS-485, according to the type of device.
Communication with the inverter equipped with
INGECON SUN EMS Board is established via its
RS-485 bus.
AAX2026IQM05_B.docx
One inverter
D. External power source +5 VDC
E. USB
F. Ethernet
Several inverters
In an installation with several inverters,
communication is established via Ethernet with one
of them, and the rest can connect to it via RS-485.
In addition, Ethernet communication can be
established individually with each inverter.
Configuration manual
37