Locking The Cooler - Mobicool FR 35 AC/DC Instrucciones De Uso

FR35 AC/DC
➤ Place the cooler on a firm foundation.
Make sure that the ventilation slots are not covered and that the heated air
can dissipate.
I
NOTE
Place the cooler as shown (fig. 4, page 3). If you operate the box
in a different position it can be damaged.
➤ Close the cooler, see chapter "Connecting the cooler" on page 11.
A
NOTICE! Danger from excessively low temperature!
Ensure that only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
➤ Press the "ON/OFF" button (fig. 2 1, page 2) for between one and two sec-
onds.
✓ The "POWER" LED (fig. 2 2, page 2) lights up.
✓ The display (fig. 2 5, page 2) switches on and shows the current cooling
temperature.
I
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
✓ The cooler starts cooling the interior.
I
NOTE
When operating with the battery, the display switches off auto-
matically if the battery voltage is low. The LED "POWER" flashes
orange.
6.6

Locking the cooler

➤ Close the lid.
➤ Press the lock (fig. 1 1, page 2) down, until it latches in place audibly.
EN
Operation
13