Operation; Maintenance; Troubleshooting - Blumfeldt 10031444 Manual Del Usuario

Connect the power cable to a 13 amp supply that is located in a safe, dry area.
The switch on the heater head is used to control the one heat setting.
0
Setting 1
Setting 2
Setting 3
Notes:
• Although the patio heater is shower proof, do not use when raining or in wet condi-
tions.
• Always disconnect the power cable from the electrical supply, when the patio heater
is not in use.
• Unplug the unit and let it cool completely.
• To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You
may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth.
• DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to
clean the heater. This may cause damage or deterioration to the surface of the heater.
• Although this heater is outdoor approved, DO NOT immerse the heater in water for
your safety.
• Wait until the unit is completely dry before use.
• If the heater will not be used for a long period of time, store it in a cool, dry location
when not in use. To prevent dust and dirt build-up, use the original packaging to re-
pack the unit
If the heater will not operate, please check the following before seeking repair of service:
• Check if the power cord is plugged into an electrical outlet, if not plug in.
• Check if electricity to the main fuse is working.
• Make certain the power switches are turned on. If not, choose a setting.
15

Operation

OFF
900 W
1200 W
2100 W

Maintenance

Troubleshooting