Medtronic CareLink 2490C Manual Del Paciente página 22

button
Figure 7: Start/Stop button and status lights
4. The four green Reading Status lights flash and fill as
the monitor gathers information from your implanted
heart device. This process usually takes less than
three minutes.
When the Reading Status lights are flashing, make
sure that the Antenna Position Status light remains
off. When the monitor is finished collecting data from
your heart device, the status lights stop flashing and
turn off. The monitor beeps twice.
5. Remove the antenna from over your implanted device
when you hear the monitor beep. Put the antenna
back into the storage area.
22
Start/ Reading
Stop Status
lights
(Green)
Power Antenna
Status Position
light Status light
(Green) (Orange)
Sending information with your monitor
Sending Sending
Status Complete
lights light
(Green) (Green)
Telephone
Line Status
light
(Orange)