Telephone Line Status - Medtronic CareLink 2490C Manual Del Paciente

Reading Status lights will begin flashing, and the
monitor will resume data collection.

Telephone Line Status

If the orange Telephone Line Status light flashes:
•
Make sure that the telephone line settings are correct.
See "Setting up your monitor" on page 14. If you need
help determining the type of telephone line you are
using, contact your local telephone carrier.
Note: Telephone line settings may be selected when
the monitor is plugged in.
Note: Verify that your telephone line is analog. The
monitor was designed to work with analog telephone
lines. If you need help determining the type of
telephone line you are using, contact your local
telephone carrier.
Note: If you have a digital subscriber line (DSL) phone
service, you may need a DSL filter from your phone
service provider placed between your telephone wall
jack and the supplied telephone cord.
•
Make sure the telephone line connections are intact.
•
Test the telephone wall jack to make sure it is
working. Connect a telephone to the telephone wall
jack and make an outside call. If you cannot call out,
connect the monitor to a different telephone wall jack.
26 Orange status lights