•
Place the monitor within ten feet (three meters) of
where you sleep, preferably on a night stand or a table.
•
Place the monitor within reach of a telephone wall
jack.
•
Place the monitor within reach of a power outlet.
•
Do not place the monitor anywhere it can get wet.
Setting up your monitor
Before you use your monitor, you will need to:
1. Check the telephone line settings on the monitor.
2. Connect the monitor to a telephone wall jack.
3. Plug the monitor into a power outlet.
You may connect a telephone to the monitor to make
and receive telephone calls, but this is not required for
the monitor to work correctly. For more information see,
"Connecting the monitor to a telephone wall jack and
power outlet" on page 16.
Note: The monitor will not work with mobile phones.
Checking the telephone line settings
Before using the monitor, make sure that the telephone
line settings are correct. There are two telephone line
settings on the monitor,
14
N-7-8-9 and T-P
Setting up your monitor
. See Figure 1.