Turbosaver TS-700 Manual Del Usuario página 15

How to Use the Pulse Vacuum Button (PULSE VAC)
Since the pressure under the normal vacuum function is set to be high, sometimes it is easy to destroy
some delicate items by high pressure in the vacuum bags. In this case, you can use the ' ' PULSE' ' vacuum
function to control the vacuum time and pressure, and prevent crushing delicate items. When packing
some juicy foods, you can also use this function and prevent liquid being sucked out.
1. Place the item(s) to be sealed into the pre-cut or custom sized bag. Leave at least 2 inches between the
contents and the top of the bag to allow for bag contraction.
2. Open lid and place the open end of the bag down into the vacuum chamber.
3. Close lid by pressing down on both sides.
4. Press the ' ' PULSE' ' button continually, till it reaches the pressure that you want. You can watch the vacuum
bag to decide the pressure. During this process, you can stop vacuum by stop pressing this button ; and
press it again to vacuum again.
5. When the pressure reaches what it needs, press ' ' SEAL ONLY' ' button to start sealing.
6. Once the indicator light has turned off, press the release buttons on both sides of the machine to release
the bag
Care & Cleaning
1. Always unplug the unit before cleaning.
2. Do not immerse in water.
3. Do not use abrasives to clean the unit.
4. Wipe the outer surface with a soft, damp cloth and soap.
5. To clean the inside of the unit, wipe away any food or liquid with a paper towel.
6. Dry all parts thoroughly before you plug in and operate the unit again.
7. Vacuum chamber may trap liquids that were drawn from the bag ; use a mild dish washing soap and a
warm, damp cloth to wipe away any left behind liquid from the vacuum chamber. Dry thoroughly.
8.Keep the upper lid of the appliance unlocked when not in use.
Trouble Shooting
Nothing happens when I press the ''VACUUM'' button:
● Make sure the power cord is correctly plugged into the electrical outlet.
● Make sure the power cord is not damaged in any way.
● Make sure the electrical outlet is operative by plugging in another appliance. If it's not, please check
the circuit breakers or fuses in your home.
● Make sure you have turned on the power switch on the back of the machine.
● Make sure the bag is positioned correctly down in the vacuum chamber.
● Press down on both sides of the lid and make sure it is locked in place.
● Wait 25 minutes to allow appliance to cool off, and then try using again.