Tabla de contenido
Publicidad
Installation Procedures
To set the projector wall mount on the wall
1
Install the wall plate on the wall.
Use M6 × 55 self-tapping screws and dia.11 × 50 anchor bolts for the installation.
If installing the wall plate on the wall using securing 5 positions, drill the holes indicated
by A using Φ11 mm. (You can use the supplied wall plate template to determine the
position of the holes.) After drilling the holes, insert a 11 × 50 anchor bolt into each hole
and secure the wall plate with M6 × 55 self-tapping screws. Make sure the arrows on the
wall plate point upward, and it is kept level.
10
GB
Installation Procedures
13
300 (11
/
)
16
5
262 (10
/
)
16
Securing 5 positions
Central axis
of arm
Unit: mm (inches)
Publicidad
Tabla de contenido
