Day/Date Models; To Set The Time; To Set The Date - Timex W217 Manual Del Usuario

W217_AS_EN_analoglayout_4 3/9/10 10:59 AM Page 6
ENGLISH
TO SET "QUICK DATE
3-Position Crown:
1) Pull crown to "Middle" position and turn CLOCK-
WISE or COUNTERCLOCKWISE until correct date
appears.
2-Position Crown:
1) Pull crown to "OUT" position and turn CLOCKWISE
until date changes. Repeat until correct date
appears. Adjust date when month has less than
31 days. Push crown in when finished.
Caution: Wearing or storing the watch with the crown
in the "middle" position will cause damage to the move-
ment. Always return the crown to the normal position,
or if you wish to save the battery life while storing the
watch, leave the crown in the "out" position.
The date function advances the date between the
hours of 10 PM and 2 AM. Avoid setting the date
during this timeframe. If you attempt to set the date
during this time period, rotate the crown at a very
slow rate to avoid damaging the watch.
® " FEATURE:
6
ENGLISH
DAY / DATE MODELS

TO SET THE TIME:

1) PULL the crown out
to the "C" position.
2) TURN the crown
either way to the
correct time.
3) PUSH in the crown to
the "A" position.

TO SET THE DATE:

1) PULL the crown out to the "B" position.
2) TURN the crown either way to the correct date.
3) PUSH in the crown to the "A" position.
TO SET THE DAY:
1) PULL the crown out to the "C" position.
2) TURN the crown either way for full 24 hour cycle
to set day.
3) PUSH the crown in to the "A" position.
7
DAY/DATE
A B C
CROWN
POSITION