Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
20,000 lbs. rated
25,000 lbs. rated
GM Puck Pattern Identification
WARNING:
Attachments
Attachments
Failure to properly install handles
could result in tow vehicle damage
or truck and trailer separation.
27"
27,000 lbs. rated Attachments
– 8 slot & pins must be used
Lynch/bail pins
22"
in locked
position.
2016-2019 GM
Puck Pattern
All handles shown in the
closed and pinned position
Puck
Puck Plug
Truck Bed
22-5/16"
2020 - newer GM
Puck Pattern
13"
FIGURE 3
Figure 4: Puck Plugs
INSTALLATION (AFTER INTIAL ASSEMBLY):
1. Remove puck plugs from all (4) of the pucks in the truck bed (Figure 4) and store for use when adapter is removed.
2. Set REESE mounting adapter onto the pucks, with the handles in the unlocked position (see next page for handle
position). CAUTION: Avoid fingers getting pinched
3. Rotate (4) handles into locked/closed position
5. Place lynch/bail pins through the handle holes as shown above (Figure 3).
© 2020 Horizon Global America, Inc.
30899N
11-17-20
Rev. B
SHEET 3 OF 5
Printed in Mexico - Imprimé au Mexique - Impreso en México
Publicidad
Tabla de contenido
