LED
Battery level
display
LED
Battery pack is charging.
flashes.
The charging period may take
up to three hours.
LED has
The battery pack is fully charged and
gone out.
ready for operation.
Inserting the battery
To insert the battery, proceed as follows:
1. Disconnect the cordless vacuum cleaner from the
AC charger.
2. Open the filter cover as described in chapter
"Opening the filter cover" on page 30.
3. Push the battery pack from underneath into the
open cordless vacuum cleaner until you hear it en-
gage. When doing so, ensure that the battery pack is
the right way up. The metal connections
point upwards and the green handle downwards.
4. Never use force when inserting the battery.
5. Put the filter cover back on (with the motor protec-
tion filter and premium filter bag installed) and
ensure that it is properly closed.
Every battery has a limited life, as it will slowly
but steadily lose its capacity to hold a charge. The
cleaning times per battery charge can therefore
decrease over time with frequent use.
should
35