Maintenance And Repair - Human Touch Novo XT2 Manual De Uso Y Cuidado

care and
To keep your product working and looking its best, please follow these simple care guidelines.
WARNING:
1. Be sure to disconnect the power cord from the electrical outlet before cleaning.
2. When cleaning the remote control or power switch, use a dry cloth only. Never use a damp cloth to clean any electrical
component.
CAUTION:
1. Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the color does not fade
prior to using the solution on the entire product surface.
2. Do not use benzene, thinner or any other solvents on your product.
Cleaning Code Standard for SofHyde or Cloth: W
To maintain your Human Touch product in optimum condition, dust it frequently and/or vacuum it with a soft brush vacuum
extension. If your product becomes dirty, use a water-based upholstery cleaner only. To treat stains, spot clean with an
upholstery shampoo or a mild detergent foam.

Maintenance and Repair:

1. The mechanics of this product are specially designed and constructed to be maintenance free. No periodic lubrication or
servicing is required.
2. Your chair should only be serviced by a Human Touch-authorized service representative.
Use and Storage Environment:
1. Do not place the chair in direct or reflected sunlight, as ultraviolet rays will quickly fade the upholstery color and cause
SofHyde upholstery to rapidly deteriorate.
2. Operate your chair in a room temperature between 41 and 104 degrees Fahrenheit (5 to 40 degrees Celsius) with humidity
levels of 10% to 70% (non-condensing) to avoid damage.
3. To prevent damage to the upholstery, before sitting in your chair make sure there are no sharp objects in your pockets and
no metal buttons or zippers that can come in contact with the chair.
4. Do not place the chair where excessive dust and pet hair can migrate into the chair's electrical and mechanical
components; this can cause malfunction over time.
5. When not in use for a long period of time, we recommend that the chair be covered, the power cord be coiled, and that
the unit be placed in an environment free of dust and moisture.
6. Store your chair in a room temperature between 5 and 122 degrees Fahrenheit (-15 to 50 degrees Celsius) with humidity
levels of 10% to 70% (non-condensing) to avoid damage; product stored in cold temperatures may require 48 hours at
room temperature to function properly.
7. Do not store near open heat or flame.
maintenance
15