Yakima EXO SwingBase Wiring Replacement Manual De Instrucciones página 2

1
EXTEND THE EXO SWINGBASE™ ARMS.
A. To extend the arms, first extend the driver-side arm by pulling the pin and
swinging it outward until the arm locks into place.
B. Then pull the pin for the passenger-side arm and extend it until it locks into place.
A
2
REMOVE THE PLUGS.
Twist the plugs 45˚and pull to
remove them from the front and
rear of the EXO SwingBase™.
Instruction #1036134A - page 2 of 8
3
SWING OPEN THE EXO SWINGBASE™.
Loosen the large knob, then pull
the pin and swing the unit open
until the pin engages and locks
the gate into the open position.
B