GM 19155550 Manual Del Usuario

P E R F O R M A N C E
GM
PARTS
Chevrolet/GMC Colorado/Canyon Exhaust
Tip Specifications
Specifications Part Number 19155550; 19155551; 19155552;
19155553; 19155554 and 19155555
Thank you for choosing GM Performance Parts as your high
performance source. GM Performance Parts is committed to
providing proven, innovative performance technology that is
truly....more than just power. GM Performance Parts are
engineered, developed and tested by the factory to exceed your
expectations for fit and function. To contact us call
1-800-GMUSEUS for the GM Performance Parts Authorized Cen-
ter nearest you or visit our website at www.gmgoodwrench.com.
This publication provides general information on components and
procedures that may be useful when installing a Chevrolet/GMC
Colorado/Canyon exhaust tip. Please read the entire publication
before starting work.
Observe all safety precautions and warnings in the service
manuals when installing a Chevrolet/GMC Colorado/Canyon
exhaust tip on your vehicle. Wear eye protection and appropriate
protective clothing. When working under or around the vehicle
support it securely with jack stands. Use only the proper tools.
Exercise extreme caution when working with flammable,
corrosive and hazardous liquids and materials. Some procedures
require special equipment or skills. If you do not have the
appropriate training, expertise and tools to perform any part of the
installation safely, this work should be done by a professional.
The information contained in this publication is presented without
any warranty. All the risk for its use is entirely assumed by the user.
Specific component design, mechanical procedures and the
qualifications of the individual readers are beyond the control of
the publisher, and therefore the publisher disclaims all liability
incurred in connection with the use of the information provided in
this publication.
Chevrolet, the Chevrolet Bow Tie Emblem, the GMC Emblem,
General Motors, and GM are all registered trademarks of the
General Motors Corporation. Chevy is a trademark of the General
Motors Corporation.
Minimum Required Tool List
Tools:
3/8" Drive Ratchet
15mm Socket
Chevrolet/GMC Colorado/Canyon Exhaust Tips
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GMSPO SPECIFICATIONS.
GM Performance Parts Exhaust Tips
Single wall, angle cut, bowtie logo; Tip Kit Part Number 19155550
Single wall, angle cut, GMC logo; Tip Kit Part Number 19155551
Dual wall, straight cut, bowtie logo; Tip Kit Part Number 19155552
Dual wall, straight cut, GMC logo; Tip Kit Part Number 19155553
Dual wall, angle cut, bowtie logo; Tip Kit Part Number 19155554
Dual wall, angle cut, GMC logo; Tip Kit Part Number 19155555
1
4
Description
1. Single wall, angle cut,
bowtie logo
2. Dual wall, angle cut,
bowtie logo
3. Dual wall, straight cut,
bowtie logo
4. Single wall, angle cut.
GMC logo
5. Dual wall, angle cut,
GMC logo
6. Dual wall, straight cut,
GMC logo
7. 2.50" clamp (not shown)
8. Instruction Manual
(not shown)
CAUTION!!! Never work on a hot exhaust system. Serious injury
in the form of burns can result. If the vehicle has been in use and
the exhaust system is hot, allow vehicle to cool for at least 1 hour.
Always wear eye protection when working under any vehicle.
19156226
IR 10OC05
PART NO.
DATE REVISION
10OC05 I
GENERAL MOTORS
SERVICE PARTS OPERATIONS
6200 Grand Pointe Drive, Grand Blanc, MI 48439
2 3
5 6
Part Number
19155022
19155026
19155024
19155023
19155027
19155025
19131642
19155751
1
PAGE OF
Quantity
1
1
1
1
1
1
1
1
6
AUTH