Publicidad
Step 7
NOTE: Before beginning this step, separate the BLACK 1-5/8" PAN HEAD SCREWS (VV) and BLACK 1-1/8" PAN HEAD
å
SCREWS (XX). Do not confuse these SCREWS.
Fasten the LEFT END (B) to the SHELVES (E and F) and BOTTOM (G). Tighten six TWIST-LOCK® FASTENERS.
å
Fasten the LEFT END (B) to the LEFT MOLDING (W). Use two BLACK 2-1/4" FLAT HEAD SCREWS (TT).
å
Now, fasten the TOP (D) to the MOLDINGS (U, V, and W). Use nine BLACK 1-5/8" PAN HEAD SCREWS (VV).
å
Fasten the UPPER SHELF MOLDING (R) to the UPPER SHELF (E). Tighten three TWIST-LOCK® FASTENERS.
å
Rounded edge
D
W
BLACK 2-1/4" FLAT HEAD SCREW
(2 used for the LEFT MOLDING)
Page 12
These surfaces
should be even.
V
U
R
E
B
Finished edge
TT
BLACK 1-5/8" PAN HEAD SCREW
F
8070-297
VV
(9 used for the TOP)
G
www.sauder.com/services
Publicidad
