Publicidad
Step 23
Refer to the enlarged diagram to identify the parts on
å
the HINGES.
The DOOR may need some adjustments. Follow the
å
text below to make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOOR from side to side (horizontal), turn
the adjusting screw in or out.
To adjust the DOOR up and down (vertical), loosen
å
both vertical adjustment screws. Move the DOOR up or
down to the desired location. Tighten the screws after
making adjustments.
To adjust the DOOR in or out (depth), loosen the
å
mounting screw one turn and move the DOOR in
or out, as needed. Tighten the mounting screw after
making adjustments.
Page 28
Mounting screw (depth)
(vertical adjustment)
158034
Adjusting screw (horizontal)
www.sauder.com/services
Publicidad
