Selecting The Wing Type; Servo Setup - Spectrum DX8 Guía De Inicio Rápida

EN
To Access the Model Name function
In the System Setup list, highlight Model Name then press the roller to access
the function. The following screen appears.
Highlight the desired character then press the roller to access. Rotate the roller
to select the character then press the roller to accept. Repeat until complete.
Pressing CLEAR removes the selected character.
StEP #4

SElECTING THE WING TyPE

Use the Wing Type function to program the wing and tail mix to match your
airplane. In this case the wing type is Dual Ailerons and the Tail Type is Normal.
To Access the Wing Type function
In the System Setup list rotate the roller to highlight Wing Type then press the
roller. The following screen appears.
Highlight the wing type NoRMAL then press the roller. Rotate the roller to select
DUAL AILERoN then press the roller to accept. The tail type in this example is
NoRMAL and will not require a programming change.
StEP #5

SERVO SETUP

With the Servo Setup functions you can adjust the servo reverse, speed, sub-
trim, and travel adjust. A servo monitor provides easy visual reference when
making adjustments.
To Access the Reverse function
With the transmitter on and the main or telemetry screen displayed, press the
roller. The Function list displays.
6
Rotate the roller to highlight Servo Setup then press the roller to access the
Servo Setup screens. The Travel Adjust screen automatically appears. Use the
roller to access the Reverse option.
Turn roller to highlight channel. Press roller to access channel. Turn roller to
select option. Press roller to accept option.
Highlight the REV NoR Graphic at the bottom of the screen. Press the roller to
select REV or NoR.
Rotate the roller to highlight the channel then press the roller.
Repeat the process to complete reversing for all necessary channels.
To Access the Sub-Trim function
In the Travel screen rotate the roller to highlight Travel then press the roller. Now
rotate the roller until Sub-Trim appears, then press the roller to enter the Sub-
Trim function.
Rotate the roller to highlight the channel then press the roller to select that
channel. Rotate the roller to access the channel you want to adjust then press the
roller to accept that channel.
SPEKTRUM DX8 • PROGRAMMING GUIDE