Yakima BackSwing 4 Manual De Instrucciones página 3

ATTACH ARMS TO MAST.
Attach lock-washers and bolts.
Tighten bolts with 9/16" wrench.
LOAD LARGEST OR
HEAVIEST BIKE FIRST.
Always load first
bike with chain
away from
vehicle.
Pull straps tightly over bike
frame, and hook onto cradle.
1033246E-3/15
The straps can
be routed under
the cables.
directions to avoid
secure with straps.
Insert coupling nuts into back of mast.
Attach one rubber strap to each
cradle and stabilizer.
stabilizer
Stabilize the
bike frame
in the
cradle.
Arrange
smaller bikes
for best
stabilization.
LOAD
REMAINING
BIKES.
Alternate bike
interference.
Stabilize bike,
NOTE:
To slide cradles along the
carrier arms, close cradle
and stabilizer. Close cradles
while loading bikes.